Blueprints of stairs, introduced on the web, make it easy to pick the right https://masterprofnastila.ru/ option. But every home has its own design attributes. Therefore, ready-made alternatives might not work. Yes, and made with his own hands drawing, which will later be set up stairs, is going to be a special source of pride of the owner facing relatives, neighbors, friends.

To begin with, determine the location of their future layout and create the following measurements:

• The height of the opening. Since the basis has been taken the finishing flooring, the first and second floors. The distance from you to another is the essential parameter.
• The width of this opening. It needs to be mentioned that it may have another configuration: from the very popular – rectangular to shaped (circle, oval or other non invasive performance). This parameter significantly impacts the choice of design.
• Height in the ceiling to the floor of the first floor. Ultimately will let you figure out the height of this passage and the correct layout and building of the stairs in the home.

Diagram and drawing of the stairs with measurements in width and height. Draws a scale design of the first floor in a private house. A location is defined for the beginning of the staircase, the amount of the flight of staircase is indicated on the ground. If the design of the first floor at the location of the structure has projections, door and window openings, markets, communications, then they’re drawn in the scheme using a reference to its supporting structures. These stop them from overlapping even at the design stage. The further details and dimensions in the plan, the fewer problems during setup.

Before Creating a drawing, you should carefully study the building standards on your stairs:

• The depth, width, height of these steps along the entire length of this structure shouldn’t change. This ensures the convenience and security of movement;
• The diameter of this stairwell for directly flights of stairs should be from 900 mm, for spiral structures from 800 mm;
• The elevation of the weapon 900-1200 mm. It is better if it is provided on both sides of the staircase;
• The drawing with the sizes of elevation using a ladder handrail

The depth of a direct step is advocated from 200 to 400 mm (maximum from 250 to 320 mm). For skipped designs on the narrowest portion of 100 mm, on the wide to 400 mm, at the center of 200-250 mm. Overhang of treads around 50 mm is allowed;

• The height of the measures must be in the range of 100-180 mm;
• The angle of slope around 45˚;
• If the staircase move straight to the doorway, is equipped with an additional platform width of at least a meter;
• The recommended number of measures for you flight – 18 pcs. For the conducting measures -16 pcs;
• The height of a passing not less than 1 900-2 000 mm (the minimum distance from step to the floor of the second floor);
• The depth of this material to the design.
• Proper drawings of the stairs to the second floor can be made only on the basis of these parameters and further calculations. Every form of construction has its own attributes.

Drawing of the staircase to the next floor

There are several ways to compile layout documentation:

• Independently. Create a calculation and perform staircase drawing simple layouts (directly, rotary with a stage ) under force for many. More Elaborate choices are better left to professionals;
• Programs for stair design. They permit you to earn a thorough layout, to find a visualization of the arrangement before installation and to make alterations. Employing 3D images you may observe the way the stairs will fit into the surrounding interior.
• Ready-made solutions. Drawings of stairs introduced online can be provided with comprehensive detailing and without it. Such projects must be assessed for compliance with calculations and construction regulations. For information, it is possible to turn into professionals.